Are you sick of the super wrong measurements you always get when repairing an electronic? Well, get the best multimeter for the money.
We have reviewed the best 3 top-rated multimeters that will give you optimum efficiency and effectiveness.
Multimeters help you to measure different values at the same time. You can get the ampere and voltage measurements with a simple turn of a knob.
They are usually used during repairs but can also be applicable when you are trying to set up a circuit board.
Why go for different types of electrical measurement tools when you can buy a multimeter that will perform the same functions in seconds. That is right; multimeters have the ability to calculate the measurements within seconds.
You can even get a multimeter that you can use in the repair of your car’s electrical parts. Let’s find out which devices are the best multimeter brands in the market.
Best Multimeter For The Money for 2019
Fluke 87-V Digital Multimeter – Best Multimeter for The Money
This gadget is made of a plastic cover and imported parts. The plastic cover completely insulates anything in the multimeter that can conduct electricity. This prevents you from being electrocuted when you are operating with high voltages.
Another feature that makes this gadget the best multimeter for the money you can ever spend on multimeters, is the analog bar graph mechanism that displays fluctuations in the unit you are measuring.
The bar graph allows you to see any unstable behavior by displaying the values in the form of a bar graph at the lower end of the display.
The auto-ranging feature the device has makes it the best multimeter to use when you are working on unstable power sources. The device can create a good range for you to measure and still have accurate measurements.
This feature also comes in handy when you have no clue how much power is being supplied to the particular point you are measuring. You can use the multimeter with the auto-ranging feature on and get a safe reading.
You can also decide to have a manual ranging on the equipment. When you are sure of the amount of power that is being transmitted to that particular point, you can go ahead and place a manual range so that you will get the most accurate value that has not been rounded off nor truncated.
Fluke 87- V multimeter also allows you to measure 10A/ 20A for up to 30 seconds. This will help you to know the stability of the power source. The stable readings also give you enough time to make observations on the current circuit board and record them.
The device is fitted with a warning alarm that will alert you when the jacks have been used incorrectly. That will prevent you from blowing up a good multimeter that could have served you for ages.
The efficiency of the multimeter is reduced when it is exposed to very low temperatures. Most refrigerator technicians complain that the product gives off false values under very low temperatures, but state that the device works perfectly in room temperature, above or a little below zero.
The device is therefore appropriate to use under normal conditions but you will need a backup plan when working with freezers and similar machines.
You Might Also Like: Best Ratchet Set for the Money
INNOVA 3340 Automotive Digital Multimeter (10 MegOhm/UL): Best Multimeter For Automotive.
The multimeter is certified as one of the best automotive multimeters by UL certification. It is able to pinpoint engine problems, giving you an easier time during repairs.
This automotive multimeter allows you to measure different parts of your auto; alternator diodes, duty cycle, solenoids, breaker points, wiring, switches among others.
This makes sure that there is no electronic device that can fail and not be detected. Most multimeters can give off false readings and lead you into believing that you got a different problem.
INNOVA 3340 gadget features a temperature probe. The probe has an amazing temperature range that can give you amazingly accurate readings even in the hottest of temperatures.
As part of the motivation to make you purchase the device, it comes with an easy-carry bag that you can place the device in and carry it comfortably.
You also get an RPM in the package. What better way to have the most accurate reading than having all the tools you need in one bag?
To make this device shoot up the competition tree, the device has auto range and overload protection features. These features not only help you to use the device appropriately but also prevent a major loss due to overexposure to hazardous power sources.
The device also has an auto-shutdown feature. This feature shuts down the device when left idle for a long duration of time hence saves up the batteries, something you don’t see every day with the other multimeters.
Let’s top off the awesomeness of this gadget with the test-lead holders. The holders are to provide protection when you are using the device hands-free.
The multimeter, though very accurate, produces slow readings. It takes up some time before arriving at the most accurate readings. Most of the users had to stick the jacks onto the electronics several times just to make sure that the slow readings are actually accurate.
This applies to the RPM clamp too. A digital multimeter review concerning this device stated that the RPM feature took too long to arrive at the final reading. The person was trying to tune a bike and the slow readings made the work super hard.
Extech EX330 Autoranging Mini Multimeter with Built-In Thermometer with Type K Remote Probe
This amazing gadget has a built-in NVC (non-contact AC voltage detector). If that does not scream the best multimeter for the money used on it, then the other features definitely will.
The multimeter is capable of interchanging between the unit ranges being measured. You will, therefore, be able to get accurate readings without the prior knowledge of the power available on that terminal.
The multimeter can measure quite a number of units. The units include AC/DC voltage and current, resistance, frequency, duty cycle, and temperature.
This ability to measure these units makes it the best multimeter for automotive repairs. You can get accurate readings on anything electronic that you have fixed in the car.
What’s more, the ability of the multimeter to measure temperature can help you to see how well the air conditioning of your car works. Not only can this be applicable in cars, but also in households and facilities that require a certain temperature to be usable.
The device is fitted with a rubber hostler. The hostler prevents the device from getting interference. Electric currents may interfere with the device and make it give off false readings that fluctuate every moment.
The rubber hostler also prevents you from interfering with the readings when you are holding it. The skin can give off heat and some electric charge and hence this will definitely corrupt the readings.
The device has a type K thermocouple fitted in it. This thermocouple can give accurate readings in between −200 °C to +1350 °C temperature range.
Even if you are a refrigerator technician, this device will prove to be the best multimeter for electronics you can use. The temperature range it has is great for this line of work.
The device cannot work well with huge farads. When you measure small capacitance with the device, it works like a charm. This is however not the case when you are measuring huge capacitance. The device gives false readings when used on the large capacitance electronics.
The device also drains batteries faster than any of the previous models. Though the device gives amazingly accurate readings, it drains the batteries fast, making changing the batteries to become a hobby.
Buying Guide For Best Multimeter Brands
What makes up a good multimeter? Let’s see the qualities and features that you should be looking for to end up with the best multimeter in the store.
- Cost: Keeping in check the cost of any device you purchase is a good idea. You should not sew up your pockets when you see some hefty price tags though. Check to see whether the features can meet up with the costs for there is no need to purchase something expensive that has the exact features of a cheaper one.
- Features: The features that are availed to a particular multimeter are what makes it better. The more the features, the better. So go for the device that meets up with your budget and has most features.
- Safety features: A multimeter must be safe for use, even with high power devices. The best multimeter for you should be fitted with ample safety features to allow you to use it at ease and that is the one you should go for.
- Accuracy: This is the number one feature that makes a good multimeter. The multimeter that is the most accurate in the store will give you the best readings and hence no guesswork.
We trust that with this informational best multimeter for the money post, you’ll get the best multimeter to serve your needs.